We use cookies to provide you with a better experience. If you continue to use this site, we'll assume you're happy with this. Alternatively, click here to find out how to manage these cookies

hide cookie message
80,259 News Articles

How to split up a Fusion Drive

Apple's Fusion Drive combines a fast solid state drive with a slow, platter-based hard drive to deliver both speed and capacity. It does this well, considering it requires no interaction from the user.

However, you may want to separate a Fusion Drive, either to gain a greater level of control or to simply swap out one of the drives. Whatever your reasons are, separating a Fusion Drive is a fairly simple process.

Backup your data

Splitting up a Fusion Drive will erase any data contained on it. if you want to preserve any data, back up first. You can check out our guide to backing up with Time Machine or our more general guide if you don't need to save everything.

Bust open the terminal

If the two drives you want to separate aren't currently running the OS but are attached to your computer, you can just open Terminal (Applications > Utilities > Terminal). Perhaps you created a Fusion Drive with a pair of external drives, or you have a Mac Pro, which has multiple drive bays, and you've paired a couple of drives in the bays as a Fusion Drive (but aren't used as a boot drive).

If you're currently running OS X on the Fusion Drive , you must run the Terminal from Recovery Mode. You can get there by holding Command+R while booting. If you have only two drives in your computer configured as a Fusion Drive, then it will also be used as the boot drive and you need to boot into Recovery Mode.

Split the drives

To split the drives, you need to delete the CoreStorage logical volume group, which is the group of physical drives that make up your Fusion Drive. First, you need to find the unique identifier for the logical volume group. You can do this by typing the following command into the Terminal: diskutil coreStorage list

You should see a table similar to the one above. At the top, you'll see the logical volume group and its unique identifier just to the right of it, it's a long hyphenated string of numbers and letters. Copy that and then use the following command to separate the Fusion Drive (replace lvgUUID with the identifier you copied): diskutil coreStorage delete lvgUUID

When you destroy the CoreStorage Logical Volume Group, it formats the drives for you as normal Mac OS Extended (Journaled) volumes (JHFS+). This is the normal type of volume that you would install OS X on or use to format an external drive.

Fusion Drive quirks

If you split up a Fusion Drive you got from Apple, you won't be able to use Disk Utility to format the drives. Disk Utility will detect that the two drives used to be an Apple Fusion Drive and show them in red text.

Not to worry though, as you can install Mountain Lion without a problem. Just exit Terminal after you delete the CoreStorage setup, and choose to reinstall Mountain Lion from them list of choices in Recovery Mode. You can select which drive to install the OS on, and upon booting you'll have access to both your drives. You'll also be able to go into Disk Utility and format them once you've installed Mountain Lion, though if you boot from Recovery Mode you'll still get the same problem formatting them.

Recovery Partition

Splitting up a Fusion Drive eliminates the recovery partition, so make sure you have access to the Internet in order to download the latest version of Mountain Lion onto your machine. The late 2012 Macs that shipped with Fusion Drives require a special version of Mountain Lion not yet available anywhere but by Internet Recovery.

IDG UK Sites

Best camera phone of 2015: iPhone 6 Plus vs LG G4 vs Galaxy S6 vs One M9 vs Nexus 6

IDG UK Sites

In defence of BlackBerrys

IDG UK Sites

Why we should reserve judgement on Apple ditching Helvetica in OS X/iOS for the Apple Watch's San...

IDG UK Sites

Retina 3.3GHz iMac 27in preview: Apple cuts £400 of price of Retina iMac with new model