Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Windows 7 Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Explanation mark on PC icon in devices?

ivesy

Likes # 0

Posted October 29, 2011 at 7:49PM

I have just had re-install WIndows 7 (32bit)on my PC something that I've done once before with no problems....

This time however there's a yellow triangle showing next to the PC icon in devices and printers.

Going into properties then hardware it says "The drivers for this device are not installed. (Code 28)" on Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8.

I've got a disk with drivers on it and updated the PC with those but I still have this problem.

Any ideas?

The motherboard is a Foxconn G31MX Series on an Intel E5300 with 4GB RAM

Like this post
ivesy

Likes # 0

Posted October 30, 2011 at 5:35AM

I've disabled it through device manager after i was unable to find any drivers. So far no problems. Could it be something that is connected by usb?

Like this post
BRYNIT

Likes # 0

Posted October 30, 2011 at 9:27AM

After a quick search I found a little information that may help. Both from the Microsoft answers web page

Click here

Click here

Like this post
BRYNIT

Likes # 0

Posted October 30, 2011 at 9:34AM

Must check my links as both are the same.

This is a link to updated drives Click here

If you type Intel(R) 82801GB/GR (ICH7 Family) LPC Interface Controller - 27B8 into google you may come up with other solutions.

Like this post
ivesy

Likes # 0

Posted October 30, 2011 at 5:36PM

Hi Thanks for the reply.

I've done as above but the problem is still there!

Not sure what else I can do. On a postive note the PC seems to be working ok......

Like this post
rdave13

Likes # 0

Posted October 30, 2011 at 6:14PM

Enable it again then run Intel Driver Update Utility. .Might sort it out.

Like this post
ivesy

Likes # 0

Posted October 30, 2011 at 6:43PM

Hi

Just tried again and still no luck.

Weird thing is when I d/c on the tower icon in devices & printers I get a new scan dialogue box?

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.