Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Mobile Phone Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

maps on PDA SatNav

cozowl

Likes # 0

Posted August 23, 2008 at 8:55AM

I recently upgraded from Destinator 6 to 7 in order to upgrade my maps on my PDA SatNav Asus MyPal 632. The program upgrade seems to be OK but I can't install the maps on the SD 1 or 2GB card. I've removed the old maps and tried refreshing the card - everything seems OK and the card is clear. However, when I come to load the new maps I'm told that there is not enough room on the card. Obviously the "ghost" of the old maps remains somewhere!
Can anyone help please?
cozowl

Like this post
peter99co

Likes # 0

Posted August 23, 2008 at 1:55PM

Format the card?

Like this post
cozowl

Likes # 0

Posted August 23, 2008 at 4:30PM

Thanks for the suggestion - tried that, got the T-shirt, no luck

Like this post
peter99co

Likes # 0

Posted August 23, 2008 at 8:02PM

Load the maps to a drive on your system and check the size. Unless you know the size you are dealing with.

Like this post
cozowl

Likes # 0

Posted August 24, 2008 at 7:39AM

Thanks for the suggestion. I did what you said - there's plenty of room and the maps loaded OK on the card. Problem is, when I launch the program on the PDA, I get a message "map not found". I obviously needs a "trigger" from within the program to tell it where to look.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.