Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Windows Vista Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Integral SD Card readers not working

myanmarboy

Likes # 0

Posted October 29, 2012 at 4:58PM

I have a Packard Bell desktop running Vista Home premium, four years old and relatively good spec. Problem - the integral sd card readers don't work. Card is good because Windows can see it OK when I connect my tablet to the pc by USB and I can drag and drop from pc to card and vice versa. The card reader slots are on a hinged block that also contains a USB and Fire Wire socket, both work ok. I know I can buy an external reader which connects by USB, but would very much like to use the SD and the Pro Duo slots integral to the pc. Anyone any ideas please? Thanks

Like this post
mole1944

Likes # 0

Posted October 30, 2012 at 4:30AM

I had a similar problem with a previous computer,answer is go on amazon and get a new one to replace youe broken on,they're not expensive and easy to fit.

Like this post
myanmarboy

Likes # 0

Posted November 1, 2012 at 10:00AM

Thanks but problem is the reader is set in a block with three other card readers, a usb port and a fire wire port. The latter two both work fine so I'll settle for an external reader via usb I think. Cheers anyway.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.