It's free to register, to post a question or to start / join a discussion
Monitor Problems Viewsonic VX2835wm
Likes # 0
Posted March 10, 2010 at 7:40PM
Hi I have bought a Viewsonic VX2835wm off my dad as he has upgraded, the monitor worked fine on his PC via HDMI to DVI, but I am having problems...Below is my issue...
I Recently bought this monitor from my father and it is still under warranty (Viewsonic VX2835wm), I am using a GeForce 7950GT Card...
The problem I have is my resolution is 1024 x 768 but the monitor supports 1920 x 1080 which is what I would like to put it to, apparenlty due to some research this is a common problem as the Graphics card is recognising the monitor as a HDTV as opposed to a monitor, but as yet I have to find a solution, I have the latest NVIDIA driver installed...
If I go to CONTROL PANEL/NVIDIA CONTROL PANEL/Add Resolutions...I click the (Enable resolution not exposed by the display) box, then under the HD, SD section click the 1080i, 1920 x 1080 at 60Hz (32bit) and click apply...
What happens next is a slight flash of the screen followed by the resolution returning to 1024 x 768 inder the PC section...
I am baffled!!.
I found some text about changing some of the HEX which I tried but to no avail, I have currently reinstalled the latest drivers, still no luck...So I am waiting for an answer from above which I do not expect anytime soon, but dont fancy spending another few nights on here searching for answer, I was hoping someone on here may have the solution to my problem.
P.S I have just upgraded my graphics card to a Nvidia GTX 285 and updated my bios, but this has not sorted the problem.
I have tried different cables top no avail and am currently running the monitor in D-Sub via VGA cable and the resolutin is fine, btu really would prefer HDMI...
Likes # 0
Posted March 12, 2010 at 10:50PM
Flashed your bios? Very brave of you..
Try right clicking the desktop, select personalize,display, adjust resolution, and see what is available. If that does not work you will also have the advanced option to click on. Don't think Vista is as reliant on Nvidia control panel as XP was.
Reply to this topic
This thread has been locked.