Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Digital Home Advice

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Sony DCR-TRV120/Windows Movie Maker

denster

Likes # 0

Posted April 21, 2010 at 1:54AM

Hello,
I am using a sony dvr-trv120 plugged directly into a gateway M350 laptop and running windows movie maker to make some short clip music videos. I’m coming straight out of a behringer mixer (tape out) in to the sony dvr-trv120. when I go direct the sound is much more full and no ambient noise as with a mike. But, here’s my problem. I can’t find a way to control the input attenuation. The dvr-trv120 seems to have a fixed mic input volume level that hates bottom end. I have to have the output from the behringer set so low that it creates allot of hiss noise at the input of the dvr-trv120.

Has anyone dealt with this type of issue? Any ideas on how to get around it? Can I record into the laptop instead of the DVR. Unfortunately, all I have at the time is Windows Movie Maker.

any tips or advice would be greatly appreciated.
Thank you,
Denster

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.