Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Beginners' Tech Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Power director 10 why wont it work!

1 next »

Cav1

Likes # 0

Posted December 17, 2012 at 2:18PM

I have just bought Power Director 10 I installed it but when I try to use it I can't get it to capture a video tape,it's just stuck on microphone I had PD 4 and it has always worked so I know how to use it, but this one just sends error messages Mini Dump.dmp and crashrpt.xml and error PDR10.exe. when I look at control panel add and remove, Power director 10 is there but no size, I can't remove it, hope someone out there can tell me what's going on, PLEASE

Like this post
Zak

Likes # 0

Posted December 17, 2012 at 5:05PM

Does your PC / Laptop / Graphics Card satisfy minimum requirements?

CYBERLINK PowerDirector 10 Ultra - PC World

Cyberlink - Search Knowledge Base

Like this post
Zak

Likes # 0

Posted December 17, 2012 at 5:06PM

Does your PC / Laptop / Graphics Card satisfy minimum requirements?

CYBERLINK PowerDirector 10 Ultra - PC World

Cyberlink - Search Knowledge Base

Like this post
Zak

Likes # 0

Posted December 17, 2012 at 5:19PM

To remove corrupt PD10 try

Revo Uninstaller Freeware

Then run CCleaner

Like this post
Cav1

Likes # 0

Posted December 17, 2012 at 6:37PM

Thank you Zak, I have desktop windows XP home edition service pack 2

Like this post
Zak

Likes # 0

Posted December 17, 2012 at 6:46PM

OK; but what about your PC or is it a Laptop - Do the specs meet the minimum requirements?

Like this post
Lazarus The 2nd

Likes # 0

Posted December 17, 2012 at 10:56PM

What can I do when CyberLink PowerDirector 10 crashes? Click here

Software Updates (7 of them) Click here

Like this post
Cav1

Likes # 0

Posted December 17, 2012 at 11:48PM

Zak sorry I made an error its home edition sp 3 not 2 and it says on the box for windows 7 vista or xp sp 2, I have a medion desk top. I have just reinstalled my old power director 3 as I was a bit fed up trying to use PD10 I have the application & support-disc and thought it was going to work for me as I started to record from my VHS an error box came up and and said it couldn't record I really don't know what is going on I haven't had any problems before its a right old mess. thanks for your help

Like this post
Cav1

Likes # 0

Posted December 18, 2012 at 12:13AM

Hi Lazorus The 2nd I have downloaded an up date so I will see if that works if not I will forget about it and see if I can take it back to Currys! Im a pensioner! cheers

Like this post
woodchip

Likes # 0

Posted December 18, 2012 at 8:16PM

You need to remove any old versions including from Regedit and using find after removing from add remove programs

Like this post
Cav1

Likes # 0

Posted December 19, 2012 at 12:39AM

Hi Woodchip I have removed anything that says Power director not sure what to do next, should I remove Quick time? would that help.

Like this post

1 next »

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.