Beginners' Tech Help
It's free to register, to post a question or to start / join a discussion
Quad core, slower than dual core
Likes # 0
Posted August 23, 2012 at 12:35PM
I recently purchased a Quad Core Desktop PC after my Dual Core gave up the ghost. In the package there was no operating system so I requested Windows 7 Professional OEM..Ive got 16 GB of RAM DDR3, and 1TB HDD, however it seems to be slower than my dual core was, has anyone any ideas, any free programmes i could possibly run to see what the problem is. I would have bought an up-to-date laptop, but they seem so very slow compared with Desktop PC's Any ideas or help would be gratefully appreciated? Thanks
Likes # 0
Posted August 24, 2012 at 12:28AM
I would do the simple things first. Go into your power options in the control panel, and make sure it's set for high performance. They are usually set to balanced or power saver. If so, you should notice quite a difference.
Likes # 0
Posted August 24, 2012 at 2:32AM
Ive done as you have advised and its already set to High Performance, thanks for the tip though!
Likes # 0
Posted August 24, 2012 at 8:13AM
Might be a silly question, but have your installed drivers for everything, and up to date ones. Who is PC manufacturer?
Likes # 0
Posted August 24, 2012 at 10:56AM
When you say its slower, what exactly do you mean. It is just slower to boot up, which could mean you are loading too much to start up (not unfamiliar with all the bloatware you get with new installations from manufacturers). If this is the case, then go to msconfig and see what you can delete from your start up tab. Same thing applies with close down.
However, the same thing could well be hogging much of your resources as well, so it would be worth while to go to Add remove programs and see if there are any programs (trials etc) you can delete from your system.
Likes # 0
Posted August 25, 2012 at 6:55PM
there would be no bloater ware on it as it as no operating system, all that's on it is what he as put on it after loading windows
Likes # 0
Posted August 25, 2012 at 7:20PM
You have a 1TB harddrive. Is that as One drive?.
If set as one drive it means the system has to check the whole drive when working, and 1TB (1000GB) is a lot of harddrive to check.
Try splitting the drive into e.g. System drive 100gb, and the rest into partitions for Documents, videos, music or whatever you choice is.
You can use the partition maker in Windows 7 for this or use a third party program.
Don't forget to defragment it after.
Terry
Likes # 0
Posted August 29, 2012 at 7:31PM
I disagree with regard to the last post.
There is no checking of the whole drive, NTFS and its MFT manages where data is stored and it makes no difference how big or small the drive is or how many partitions it has.
Likes # 0
Posted August 29, 2012 at 7:35PM
To continue
However building multiple drives into a stripped Raid will speed up access times.
Likes # 0
Posted September 3, 2012 at 11:09AM
Sorry Woodchip, but I have to disagree. Unless he put the OS on himself, which I doubt, I would still suspect some bloatware.
Reply to this topic
This thread has been locked.
Check out PC Advisor's other tech forums
Top 5 Most Popular
-
Samsung Galaxy S4 vs iPhone 5 vs HTC One comparison review
-
New iPhone 5S, iPhone 6 release date UK: When will the new iPhone arrive?
-
Apple iPad 4 review: is this the best tablet money can buy?
-
Galaxy S4 vs BlackBerry Z10 comparison review - which is best, the Samsung or the BlackBerry?
-
Samsung Galaxy S4 vs Apple iPhone 5 comparison review



