Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Consumer Advice

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Networking: Wireless Bridge + Web Server

jwhiplash

Likes # 0

Posted July 6, 2012 at 2:41PM

Hi,

I would like to know the correct way of configuring a network with a wireless bridge as follows:

Sky Router -(Wired)-> Buffalo WHR-G300N (#1) with clients ~(Wireless)~> Buffalo WHR-G300N (#2) with clients and web server.

(All clients have internet access)

Both Buffalo Routers have DD-WRT installed.

The main problems I have at the moment is:

1) Clients wired to Buffalo #2 are unable to communicate to other Buffalo #2 wired clients.

2) The web server that is wired to Buffalo #2 cannot accept incoming connections despite using no-ip.com and configuring the routers to accept the conns.

Absolutely any advice would be greatly appreciated :)

Many Thanks, Jay

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.