Contact Forum Editor

Send an email to our Forum Editor:


PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Networking Help


It's free to register, to post a question or to start / join a discussion


 

How to make 2 subnet communicate


Likes # 0

I have 2 subnet on the network, 192.168.10.x and 192.168.30.x.

192.168.30.x can ping .10.x and print from the printers on .10.x but 192.168.10.x can not ping or print from the other subnet (.30.x)

192.168.30.x --- GW - 192.168.30.4

192.168.10.x ----- GW - 192.168.10.5

Like this post

Likes # 0

The whole point of the Subnet Mask is to prevent the different Subnets from communicating.

If you have a main router using the 192.168.10.0 subnet and a second router as a "LAN client" of the main router and using the 192.168.30.0 subnet, this may let you access 192.168.10.x addresses from the main router, but it won't work the other way round.

You could try using the subnets 10.0.10.0 and 10.0.30.0 with the Subnet Mask 255.0.0.0 to see if that works the way you want. (Note the different Subnet Mask address used with 10.x.x.x addresses.)

Like this post

Reply to this topic

This thread has been locked.



Send to a friend

Email this article to a friend or colleague:


PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.