Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Networking Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

wii not compatable to latest multi-channel BT Router

BERKELEYBOY

Likes # 0

Posted September 24, 2011 at 4:47PM

Have phoned Wii who tell me that existing Wii consuls will not connect to the latest multi channel BT Wireless HUB 3 any body solved this probelm

Like this post
mgmcc

Likes # 0

Posted September 25, 2011 at 1:32PM

One possible solution might be to connect a Cable/DSL Router (which doesn't incorporate a modem) to one of the Hub's LAN ethernet ports and connect wirelessly to that instead of directly to the Hub.

The same could be achieved by plugging a separate Wireless Access Point into the Hub, but stand-alone Wireless Access Points tend to be as expensive, if not more so, than a wireless Cable/DSL router which, of course, incorporates a Wireless Access Point.

Like this post
BERKELEYBOY

Likes # 0

Posted September 26, 2011 at 10:40PM

Thank you for your response unfortunately the Hub/Phone point are in the kitchen so cannot connect ether wire

Like this post
mgmcc

Likes # 0

Posted September 27, 2011 at 7:54AM

"the Hub/Phone point are in the kitchen so cannot connect ether wire"

Why not? The Cable/DSL Router or Wireless Access Point would be located beside the Hub, with devices connecting to it "wirelessly".

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.