Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Networking Help

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

EpsonNet config settings

stiefnu

Likes # 0

Posted February 4, 2011 at 3:26PM

I'm having problems setting up my Mac (OSX 4.11) to print to an Epson Stylus Office B1100 printer, via an EpsonNet EU-67 10/11 Base Tx external print server. I have downloaded the correct Epson software for printer & server, and the printer works ok when directly connected to the Mac with USB cable. However, when connected via the server, although I am able to detect the printer with the Printer Utility (to StatusMonitor, Nozzle Check, etc.), it will not print documents. I have an idea I may need to change something in the EpsonNet config.app but don't know what. The EpsonNet manual is in English, Jim, but not as we know it! I've tried the Epson help desk, both on-line and over the 'phone, without success.

Like this post
stiefnu

Likes # 0

Posted February 9, 2011 at 1:25PM

Thanks for the suggestion, Howard. Problem finally resolved by clearing out all Epson drivers and starting again -- which I'd done before but this time it worked -- how and why, I know not. 'puters, huh?

Like this post
howard64

Likes # 0

Posted February 9, 2011 at 12:36PM

does the printer show up with a network address? if so try entering that address in your firewall as trusted.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.