It's free to register, to post a question or to start / join a discussion
Music wired network
Likes # 0
Posted January 19, 2011 at 2:55AM
Hiya - I have a Netgear ReadyNAS Duo (RND2210) connected via a D-Link Switch (DAP-1522)v.1 to a Squeezebox Duet. Its wired because I have huge music files (>100Gb FLAC) that the Duet plays for me - wireless struggles to keep up.
I have an old T41 IBM laptop that I can use to setup the network.
I'd like to give this little island of connectivity access to the internet.
Every day I use a wireless network for my work laptops; an IBM X200s and a T42 connecting via a HTC Evo 4G (PC36100) which provides a wireless hotspot for up to 8 connected devices.
Can I link my wired, music network into my currently separate wireless, PC network, perhaps using the T41 laptop (with its wired NIC & a wireless NIC) as a bridge . . .??
Any suggestions would be very much appreciated.
Likes # 0
Posted January 19, 2011 at 8:52AM
If the T41 Laptop connects to the internet "wirelessly" and its wired ethernet adapter is not currently used, you can enable "Internet Connection Sharing" on the Wireless Network Connection. Your wired music network could then connect to the ethernet adapter for internet access.
When you do this, the T41 Laptop's "wired" ethernet adapter will be given the IP address 192.168.0.1 by Windows and will act as the DHCP server to allocate IP addresses to the connected devices.
From your other thread, I see that your router operates in the 192.168.0.0 Subnet, so this will have to be changed to avoid a conflict as Internet Connection Sharing must use this range. You need to change the third octet (number) of your router's own IP address from "0" to say 1 or 2. Computers getting their addresses automatically will continue to do so, but the one you've manually configured would have to have its third octet changed too. Any firewall configuration that uses IP addresses will need to be reconfigured.
Reply to this topic
This thread has been locked.