It's free to register, to post a question or to start / join a discussion
Those Haynes Manuals-If you use one- this is guide is a must have
Likes # 0
Posted July 31, 2012 at 8:31AM
This is the Ultimate User Manual
How to read Haynes manuals
Haynes: Rotate anticlockwise. Translation: Clamp with molegrips then beat repeatedly with hammer a guidenticlockwise.
Haynes: This is a snug fit. Translation: Clamp with molegrips then beat repeatedly with hammer.
Haynes: This is a tight fit. Translation: Clamp with molegrips then beat repeatedly with a hammer.
Haynes: As described in Chapter 7... Translation: That'll teach you not to read the instructions before y guideou start. Now you are looking at scary photos of the inside of a gearbox.
Haynes: Undo... Translation: Go buy a tin of WD40 (giant size).
Haynes: Retain tiny spring... Translation: PINGGGG - "Where the hell did that go?"
Haynes: Press and rotate to remove bulb... Translation: OK - that's the glass bit off, now fetch some good plie guiders to dig out the bayonet part (and maybe a plaster or two).
Haynes: Lightly... Translation: Start off lightly and build up till the veins on your forehead are throbbing then clamp with molegrips then beat repeatedly with hammer.
Haynes: Weekly checks... Translation: If it isn't broken don't fix it.
Haynes: Routine maintenance... Translation: If it isn't broken, it's about to be. We warned you. guide Haynes: One spanner rating. Translation: An 3 year old could do this... so how did you manage to screw it up?
Haynes: Two spanner rating. Translation: Now you may think that you can do this because two is a low, teensy weensy number... but you also thought the wiring diagram was a map o guidef the Tokyo underground (in fact that would have been more use to you).
Haynes: Three spanner rating. Translation: Make sure you won't need your car for a couple of days.
Haynes: Four spanner rating. Translation: You're not seriously considering this are you?
Haynes: Five spanner rating. Translation: OK - but don't ever carry your loved ones in it again.
Haynes: If not, you can fabricate your own special tool like this... Translation: Hahahahahahahahahahahahahahahahahahahahahahaha. guide Haynes: Compress... Translation: Squeeze with all your might, jump up and down on it, throw it at the garage wall, then find some molegrips and a hammer...
Haynes: Inspect... Translation: Squint at really hard and pretend you know what you are looking at, then declare in a loud knowing voice to your wife "Yep, as I thought, it's going to need a new one"
Haynes: Carefully... guide Translation: You are about to suffer deep abrasions.
Haynes: Retaining nut... Translation: Yes, that's it, that big spherical blob of rust.
Haynes: Get an assistant... Translation: Prepare to humiliate yourself in front of someone you know. guide
Haynes: Turning the engine will be easier with the spark plugs removed. Translation: However, starting the engine afterwards will be much harder. Once that sinking pit of your stomach feeling has subsided, you can start to feel deeply ashamed as you gingerly refit the spark plugs.
Haynes: Refitting is the reverse sequence to removal. Translation: Yeah, right. But you swear in different places.
Haynes: Prise away plastic locating pegs... guide Translation: Snap off...
Haynes: Using a suitable drift... Translation: Clamp with molegrips then beat repeatedly with hammer.
Haynes: Everyday toolkit Translation: RAC Card & Mobile Phone
Haynes: Apply moderate heat... Translation: Unless you have a blast furnace, don't bother. Alternatively, clamp with molegrips then beat repeatedly with hammer. guide
Haynes: Index Translation: List of all the things in the book, exept what you need to do.
Likes # 0
Posted August 1, 2012 at 4:03AM
I've got a collection of them,as every time I changed model of car I bought another.I bought one for my Ford Transit Minibus as it developed a fault in the braking system(highly dangerous fault,they simply ceased functioning)and on referring to the relevant section in the manual,the various components of the braking system were totally different.I gave up & took it to a local garage & it took the garage three full days to rectify the problem.I knew the mechanic from school & had a chat with him,apparently there are twenty different front brake calipers possibly fitted to Transits which was why it took three full days as the Parts Centre kept supplying the wrong calipers.
Likes # 0
Posted August 1, 2012 at 7:54AM
There is the other instruction in the Haynes Manuel I like.
Remove nut located just behind xyz = if you do manage to get it out you will never be able to replace it.
Likes # 0
Posted August 1, 2012 at 11:55AM
I have found them useful in obtaining information but I think it helps to have more that a basic knowledge of mechanics before you start. For instance replacing a light bulb can be a 5 minute operation when you know where to find the retainers.
Likes # 0
Posted August 1, 2012 at 3:08PM
Over the years I have purchased many Haynes books, and all have served their purpose well.
The last one that was purchased for a 'modern' car, left me rather confused as to the electrics on that vehicle. Best left alone to someone in the know was the motto!.
I recall many years ago, when I wanted to change the bushes in the back-end of an Allegro. Haynes was suggesting all sorts of things, including 're-gassing' of the suspension. The whole exercise would have taken more than half a day, plus specialist 're-gassing' if the instructions were followed. Quick look, a chat with the local main dealer mechanic, and two hours, a couple of jacks, a plank of wood, a pair of car ramps and the job was done. Apparently the dealers charged about 6+ hours for the job with extra fees attached?.
Reply to this topic
This thread has been locked.