It's free to register, to post a question or to start / join a discussion
How to configure a VPN Tunnel?
Likes # 0
Posted June 30, 2013 at 6:59AM
A client has performed some network maintenance on their side and, as part of the change, has modified the IP address of some of the servers we connect to, causing us to lose access. Our VPN tunnel terminates behind a firewall on their network. Some of the machines were behind the firewall to begin with, while others were moved behind the firewall as part of the change. To further complicate the situation, the individual servers also run firewalls which only allow access from specific IP ranges.
1 Please identify what changes (if any) need to be made on our VPN appliance to restore connectivity to the client's servers. 2 After verifying that the VPN configuration is correct, what would you do to confirm that we have access to the servers? Please indicate what specific commands you would run. 3 Assuming that we still do not have connectivity to the servers, what would you request the client to do to check that we have been given access to their network? What information would you request from them?
Reply to this topic
This thread has been locked.