It's free to register, to post a question or to start / join a discussion
Printer not printing legibly (kodak esp 3.2)
Likes # 0
Posted May 8, 2013 at 3:04PM
Hi, I've recently bought a Kodak esp 3.2 and have already used about two cartridges (both black and colour).
However, I've found that when I print out my work, often the black is faded/illegible as the black does not always print. Today, I replaced an empty black cartridge and calibrates the printer as well as cleaned the printhead, however the problem remained.
I have half a colour cartridge left, so any pictures/diagrams are faded and unreadable. I think this might be due to the red portion being run out, however I cannot afford to replace the cartridge for this if it still has half the contents still in there (would be such a waste!).
Is there anything I can do to make my printer print correctly? I really need to use it for work, so any suggestions would be great. Or if you know why it's playing up so much that would be brilliant - I've only had it since November, and have had this problem inconsistently since I first got it (it always seems to coincide with when the ink is running low or has just been replaced). I've kind of got fed up with this printer, as I bought it for its economy printing, and am having such issues with it.
Thanks for any help you can give me!!
Reply to this topic
This thread has been locked.