Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Burn process failed with status 3

carnoustiejim

Likes # 0

Posted February 12, 2013 at 11:28AM

hi im getting this message when trying to burn a movie checked on net and it says to turn on dma in device manager when i went to ide ata/atapi controllers there is no primary ide channel the info there is ata channel o,ata channel o,ata channel 1,ata channel 1,standard dual channel pci ide controller, standard dual channel pci ide controller when i go to advanced settings the device properties box is empty o/s win7 can you help me thank you kirriejim

Like this post
johndrew

Likes # 0

Posted February 12, 2013 at 2:57PM

If your drives are SATA there is no IDE/ATA function so you cannot have the facility. What exactly are you trying to do and using what hardware and software?

Like this post
carnoustiejim

Likes # 0

Posted February 12, 2013 at 3:44PM

hi iwas burning a movie to dvde useing nero 11 burned failed i had a look at the log where it said (ExpressUI Burn process failed with status 3) thanks kirriejim

Like this post
Lazarus The 2nd

Likes # 0

Posted February 13, 2013 at 3:33AM

Disable SmartEncoding..

read this Click here

Like this post
User9207

Likes # 0

Posted February 22, 2013 at 3:49AM

I have used Appgeeker DVD Creator to convert various video files into something a DVD player can read.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.