Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Connecting power cable from Bi-Directional

night

Likes # 0

Posted February 3, 2013 at 4:37PM

Where does one plug in the power cable from the Bi-Directional to the Directional motherboard, as the Bi-Directional is supplied with long lead to Sata Drive, but the power lead which is supplied with the kit is very short,does one have to purchase an extension lead? and were does it plug in.

Like this post
Fruit Bat /\0/\

Likes # 0

Posted February 3, 2013 at 4:51PM

A little more info may help us - like make and model of equipment?

Like this post
night

Likes # 0

Posted February 4, 2013 at 10:43AM

Hi FruitBat, It is a Bi-Directional IDE/SATA Converter, made by IOMAH and is supplied with leads one for detail to SATA and the other for power which is a shorter lead and I wish to know where to plug it in for power it naybe one needs a longer lead from the converter I am not sure?

Like this post
Fruit Bat /\0/\

Likes # 0

Posted February 4, 2013 at 2:55PM

look at 2nd and third pictures here does that help?

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.