Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

JEDEC and RAM. Missing info...

Barrykneeshaw

Likes # 0

Posted December 31, 2012 at 4:02PM

I (very) recently replaced some RAM chips in my Acer M3910, upgrading it to 14gb from 9 (yes I know,long story). When I checked it out with CPUID it registered all 14gb but in the two new 4gb RAM chips there was an anomaly in the SPD columns of CPUID. In the two RAM chips (a SAMSUNG 2GB and a NANYA 4GB)all 4 JEDEC columns had info in them but in the 2 new (INTEGRAL 4GB) there was only info in columns 2 to 4, column 1 being blank. I checked out the RAM chips beforehand to make certain they were compatible but now have the feeling I've made some terrible error. Can anypne explain? I'm not very hot on tech so words of one syllable please...

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.