Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

epson printers display stopped status

bbmf474

Likes # 0

Posted December 12, 2012 at 11:43AM

I use a mac Os10.5.8 and have two epson printers. Neither will print and show printer is ready but the show 'stopped' status. cannot print test page and in system preferences printers are shown connected and shared. Help would be appreciated, thanks

Like this post
bbmf474

Likes # 0

Posted December 12, 2012 at 12:32PM

The connection to the printer is fine as I can scan from photoshop and it will read a SD card. Any help? thanks

Like this post
retep888™

Likes # 1

Posted December 12, 2012 at 12:43PM

Suspect this is a driver problem, are you using up to date drivers from Epson for your Leopard? USB or Network type of connection?

Suggest you to delete & reinstall the drivers again for your printers, unfortunately Mac doesn't operate the same way as Windows.

You have a shadow thread click here, put a green tick to it so as to stop confusion if you can.

Like this post
bbmf474

Likes # 0

Posted December 12, 2012 at 2:11PM

Thanks retep888, I have done as suggested and all is well! Thanks once again

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.