Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

How to install old camera which no longer recognised

Glen

Likes # 0

Posted December 8, 2012 at 4:15PM

I am trying to re-activate my old AIPTEK pencam plus mega camera (1.3 Mp) It worked fine on my old 98SE PC. I now have Vista Business. The camera read-out shows pix have been saved on camera. No drivers available in windows or could be found online, but eventually found original installation CD, and installed Aiptek "Mega Camera Manager V 1.3", which opens OK. I have tried all the settings in "Auto Play" but always get "Cannot connect your camera". I would prefer to import pictures with windows. Is it all a lost cause with an ancient device and no modern driver? Glen

Like this post
rdave13

Likes # 0

Posted December 8, 2012 at 4:28PM

This is a McAfee secure site so should be OK. Click the blue link, this might be the correct driver.

Like this post
rdave13

Likes # 0

Posted December 8, 2012 at 4:32PM

I've scanned the MiniXP_1.5 zip file with malwarebytes and SAS and no problems found.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.