Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Linksys USB Adapter and Windows 7

fourchon

Likes # 0

Posted December 2, 2012 at 11:28PM

Running Windows 7, have Cisco Router. Desktop has no wireless card so using USB adapter. Laptops run wireless ok, but trying to get USB no luck. Tried D-Link and now Linksys. Error message Windows couldn't automatically bind the IP protocol stack in the network adapter.

Drivers are up to date. Connection manager can find the network when prompted i put in password, but still no luck.

Any ideas out there

Like this post
fourchon

Likes # 0

Posted December 4, 2012 at 10:30PM

AVG Linksys AE1000 and windows firewall

Like this post
JJWatkins88

Likes # 0

Posted December 4, 2012 at 10:41PM

I had a similar problem, try going on: Run CMD Then type: netsh interface ipv4 reset netsh interface ipv6 reset Then Restart your computer It worked but me, so worth a try!

Like this post
Fruit Bat /\0/\

Likes # 0

Posted December 4, 2012 at 10:42PM

run

netsh winsock reset

retry

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.