Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

change from netgear router to BT home hub

weemacs

Likes # 0

Posted October 23, 2012 at 8:08PM

I have changed from a netgear DG834g v2 router to a BT home hub 3 but I cannot get my wireless printer to work or for it to see my D Lan 200 wireless N adapter. My i pad phone etc can see it but not connect. I have now reverted back to netgear and can't see it at all. Any advice wd be gratefully received. Have done a system restore to before I installed the bt home hub but makes no difference. Thanks.

Like this post
onthelimit1

Likes # 0

Posted October 23, 2012 at 9:12PM

Have you run the wizard on the printer to connect to the home hub. Will obviously need the new wireless key from the hub. With a new router, you're starting from scratch, so need to setup each device with the new key.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.