Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Paint shop pro X3 transfer

Beth

Likes # 0

Posted October 16, 2012 at 5:58PM

I have a copy of the programme which I purchased as a download a year ago. I want to transfer it from and XP PC to a Vista HP PC. I can't find any advice on the Corel website. They just seem to want to push sales and I don't want to buy an upgrade. How do I do this?

Like this post
Forum Editor

Likes # 0

Posted October 16, 2012 at 6:45PM

You will have saved the downloaded file in a folder on your hard drive.

You'll need to search to locate it, but once you have you can transfer it to a memory stick or to a CD.

Then move the file into the 'Downloads' folder on your Vista machine and double click on it. The installer will run, and away you go. You'll be prompted for your installation key, and here's hoping you kept a note of it, or kept a copy of the email you received at the time with the key in it.

Remember that your license only allows you to run the software on one machine.

Like this post
Beth

Likes # 0

Posted October 16, 2012 at 8:54PM

I do have the email saved so I have the installation key and I remember the bit about the licence.

I'll give it a try tomorrow when I have time to concentrate.

Thank you

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.