Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

scottish Power energy monitor set-up required

Graham*
Resolved

Likes # 0

Posted September 24, 2012 at 9:07PM

Having had the solar panel people in to move the isolators in the garage slightly, so out of the way of the car mirror, the energy monitor is no longer giving a reading. The red light on the transmitter was flashing, which I assumed meant a low battery. I've replaced those, pressed the reset button, but no lights, no nothing.

I can't find the instructions but remember pressing the up and down buttons together to pair them up. I've got them both together in the kitchen but they're not talking.

Any help most welcome.

Like this post
lotvic

Likes # 0

Posted September 24, 2012 at 10:35PM

Is it one of these The Current Cost 128 ENVI http://www.currentcost.com/product-cc128.html there might be instructions on website.

Like this post
Graham*

Likes # 0

Posted September 24, 2012 at 11:45PM

Thanks, I shall persist but I think it's died.

Like this post
Woolwell

Likes # 0

Posted September 25, 2012 at 10:25AM

Is this the manual? manual

If it is page 7 tells you how to pair.

When I get a new product I go to the website and download the manual. I then have an electronic version on standby.

Like this post
Graham*

Likes # 0

Posted September 25, 2012 at 11:13AM

Woolwell

Thanks, that's the one. Can't see how to download it, though.

Like this post
northumbria61

Likes # 0

Posted September 25, 2012 at 11:21AM

Opens in PDF - there is a SAVE option on Page 1 of 16 along the bottom next to Print button

Like this post
Woolwell

Likes # 0

Posted September 25, 2012 at 11:56AM

Alternatively when it is open right click on it and choose save as.

Like this post
Graham*

Likes # 0

Posted September 25, 2012 at 12:36PM

I'm using Foxit, don't get that option :-)

Like this post
lotvic

Likes # 0

Posted September 25, 2012 at 1:39PM

when I clicked on Woolwell's link and pdf opened in Foxit I found the file in: C:\Documents and Settings\lotvic\Local Settings\Temp

or you can (in Foxit) click on File | 'save as' and save it again in a folder of your choice.

Like this post  
Graham*

Likes # 0

Posted September 25, 2012 at 2:36PM

lotvic, Woolwell

All back up and running now, thanks. New batteries fitted in transmitter and paired up. Oh, and solar panel isolator turned to ON.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.