Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

IP address for printer

« previous 1 2 4

Sapins
Resolved

Likes # 0

Posted June 24, 2012 at 11:57AM

Where do I find the IP address for my epson RX620 printer.

I have windows 7 on a desktop connected through a Netgear DG834G v2 router, with the printer connected by USB, it works wirelessly, with my laptop and and now I want use it wirelessly with my iMac which asks for the IP address of the printer, I have looked everywhere but I cannot find it. While I still have most of my hair and my sanity can anyone tell me exactly how to find this IP address please.

Like this post
Sapins

Likes # 0

Posted June 28, 2012 at 8:51AM

Loaded driver ok but would not print test page and when printing an e-mail first message "not responding" then it went "pause"

Like this post
retep888™

Likes # 0

Posted June 29, 2012 at 3:39AM

1.Make sure you get the correct Windows PC's IP address because if you don't fix/reserve it in the router,it may change next time you boot it up.

2.Double check the printer's name & shared name are the same on the windows desktop e.g. RX620 & input it on the Name box(i.e. instead of the IP address this time.)

3.In Print & Scan, highlight the newly added RX620 & click the (-) sign to delete it & reinstall the printer with Gutenprint driver from the beginning e.g. clicking the (+) sign to add printer.

4.After printer installation, check that in Print & Scan you have both printer RX620 icon on the left panel as well as in the middle with description as :

Location:

Kind: Epson Stylus photo RX620- CUPS+Gutenprint v5.2.8

Status: Idle

5.Test the printer.

Like this post
Sapins

Likes # 0

Posted June 29, 2012 at 1:00PM

The settings are exactly as you said they should be and I have successfully printed a test page and a document.

I would like to say a really big thank you for all your help and patience, I was on the point of giving up.

Thanks again,

Regards,

Sapins.

Like this post  
retep888™

Likes # 0

Posted June 30, 2012 at 3:04AM

No problem, please green tick this thread.

Like this post

« previous 1 2 4

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.