Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Downsizing a CorelDraw X5 document

HondaMan

Likes # 0

Posted June 15, 2012 at 11:49AM

I have recently prepared my local pub's menus on CorelDraw X5.

The menus are now going onto the web, but the files which have been converted to PDFs are too large at 1627KB. The website people need them reduced to about 500KB!

Any assistance advice or guidance would be very much appreciated.

Like this post
ronec

Likes # 0

Posted June 15, 2012 at 6:20PM

I have not done this myself with Coreldraw, but does it not have an 'Export to Web' in the File drop down box. Would that way be ok for your web people?

Like this post
HondaMan

Likes # 0

Posted June 16, 2012 at 7:50PM

Tried that, still too big.

However, I did find something on the web which reduced the size by about 70%which seemed to be ok.

I'll mark this as finished.

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.