It's free to register, to post a question or to start / join a discussion
Likes # 0
Posted April 15, 2012 at 7:21PM
Is there a scanner or software with a scanner on the market that will allow multi images to be scanned but saves them as separate images?
Likes # 1
Posted April 15, 2012 at 11:28PM
I have a Cannon Lide25 scanner which seems to do what I think you need.
I have not used this before, but I will try it out and see what happens.
Here goes then!
I have just placed into the scanner three separate photographs and after opening the Canoscan dialogue box and set it to (MULTI SCAN). It went into scanning which just looks a bit like normal, but when you get as far as the file where you’re scanned photographs show, they show up as different photos. Then onto the directory where you want the scanned photographs to be sent and they are all there with separate file numbers, just as if you had made three separate scans. You can of course scan as many as you like or as few as is required at the same time.
I also scanned a sheet with separate photographs that was a leaflet with printing on and it just turned out the whole sheet as one unit / photo. I think what makes the difference is the fact that you leave a gap in between each photo to be scanned that you want to turn out as separate files. If that makes sense
I hope this helps you. Regards Migwell
Likes # 0
Posted April 15, 2012 at 8:22PM
You can get scanners with automatic document feeders that will take one image after another. Scanners, with backlights, will scan several slides/negatives at the same time as separate images. I am not aware of a scanner that will automatically save several photos/documents that are scanned at the same time. I have placed several small photos on a scanner, previewed them and selected an individual photo in turn.
Reply to this topic
This thread has been locked.