Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

old router to new p.c

spook88
Resolved

Likes # 0

Posted February 14, 2012 at 11:43AM

Hi,

Just checking here to see if i use my old netgear DG834G modem/router which have only been using for wirelss up to now to a new desktop p.c which is not installed yet with any internet connections - will i just be able to plug in the ethernet cable to the p.c and get the same connection on wired as on wireless?

Or do i need to factory reset it to connect to the p.c by hardwire and start again?

*not wanting the p.c on wirelss just wired.

Thanks

Like this post
rdave13

Likes # 0

Posted February 14, 2012 at 11:49AM

Just connect the ethernet cable.

Like this post
rdave13

Likes # 0

Posted February 14, 2012 at 11:57AM

Sorry for interruption, just connect via Ethernet cable as you router is already set-up.

Like this post  
spook88

Likes # 0

Posted February 14, 2012 at 12:18PM

..ok, thanks!

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.