Contact Forum Editor

Send an email to our Forum Editor:


PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom


It's free to register, to post a question or to start / join a discussion


 

connector required


Likes # 0

Can anybody tell me what type of connector is required to plug into the tv tuner on the back of a acer Z5600 or the packard bell one two.Both of these have freeview card fitted but i cant find how to connect to a coax.

Like this post

Likes # 0

According to this the acer has no tvfittedAcer 5600 Unless you mean you had a card fitted in which case you should see the coax socket

Like this post

Likes # 0

If you have a tv tuner there will be a coax socket as on a TV. If not you can buy a tiny USB TV tuner for about £30.

Like this post

Likes # 0

Or less:

http://www.google.co.uk/products/catalog?hl=en&cp=7&gsid=r&xhr=t&q=usb+tv+tuner&gsupl=&rlz=1R2ADRAenGB354&bav=on.2,or.rgc.r_pw.,cf.osb&biw=1280&bih=907&wrapid=tljp1321555464363012&um=1&ie=UTF-8&tbm=shop&cid=17423119873056981138&sa=X&ei=slXFTubgNcq38gPhkY2HCw&sqi=2&ved=0CI4BEPICMAU#

Like this post

Likes # 0

Like this post

Likes # 0

I ACTUALLY HAVE A PACKARD BELL ONE TWO WHICH I HAD PREVIOUSLEY ASKED ABOUT BEFORE BUT HAD NO LUCK,HOWEVER I NOTICED THAT TH ACER HAD THE SAME CONNECTION WHEN I SAW IT IN STAPLES. IT IS DEFINATELY NOT A COAX CONNECTION WHAT I NEED IS A CONNECTOR WITH ACOAX AT ONE END.

Like this post

Likes # 0

Both systems have an esata connection on the back but not TV in. Are you sure that you have identified the ports correctly.

Like this post

Likes # 0

Which version of Packard Bell One Two?

Like this post

Reply to this topic

This thread has been locked.



Send to a friend

Email this article to a friend or colleague:


PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.