Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Resource problem with flash drive

edenworkshops

Likes # 0

Posted September 7, 2011 at 12:49PM

Hello

My Kodak camera printer dock has stopped working, so to transfer the pictures from the cameras SD card I bought a little card reader.

When I connect the reader to my pc it is not recognised in my computer.

In device manager when I click the properties of the reader I see that it says in the general tab:

"This device cannot find enough free resources that it can use. (Code 12)

If you want to use this device, you will need to disable one of the other devices on this system."

In the resources tab it says in resource settings:

"Memory Range 000C8000 - 000C9FFF"

In settings based on it says:

"current configuration"

In conflicting device list it says:

"Memory Range 000C8000 - 000C9FFF not available."

Can anyone help me with this please, Im'e a bit of a newbie.

Thank you

Richard

Like this post
northumbria61

Likes # 0

Posted September 7, 2011 at 1:07PM

It appears you have a conflict although I am unsure of how to solve it at this time. See here which relates to what you are having problems with - enter link description here

Like this post
northumbria61

Likes # 0

Posted September 7, 2011 at 1:08PM

I am looking for further info. for you and also hope that someone else may be able to shed some light for you.

Like this post
northumbria61

Likes # 0

Posted September 7, 2011 at 1:13PM

Also have a read here (not a card reader as in your case but similar conflict) enter link description here

Like this post
edenworkshops

Likes # 0

Posted September 7, 2011 at 2:11PM

Thank you for the trouble you are taking.

Richard

Like this post
edenworkshops

Likes # 0

Posted September 7, 2011 at 5:55PM

The card reader is a generic chinese thing.

I uninstalled it and re-installed it.

In the properties tab of this device I am being told to manualy configure the device on the resource tab, using the documentation that came with the device...what documentation?

How should I procede?

Thank you

Richard

Like this post
letsgetrdy

Likes # 0

Posted September 7, 2011 at 11:17PM

What Operating System are you using?

Like this post
edenworkshops

Likes # 0

Posted September 8, 2011 at 8:02AM

I am running windows XP.

Richard

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.