Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

installing Windows 7 on Raid o

t.long

Likes # 0

Posted June 11, 2011 at 6:22PM

I am trying to install Windows 7 on a raid 0 disk. I have created the raid array and enabled it in the BIOS.

Problem is Windows does not like my drivers. When it comes to the actual install of Windows it can not see the disk/s when I try and load the driver (from Gigabytes website, have tried them on both a thumb drive and a dvd) Widows states "no signed device drivers were found. Make sure that the installation media contains the correct drivers, then click okay".

my mother board is a Gigabyte GA P55 UD5. Does anyone have any ideas were I can obtain a signed driver?

Like this post
retep888™

Likes # 0

Posted June 12, 2011 at 11:32AM

There are 3 RAID drivers for your motherboard, depends on which connections you've chosen, please make sure using the correct RAID driver, i.e.

Intel SATA RAID Driver for Intel RAID array

GIGABYTE SATA2 Driver for GIGABYTE SATA2 RAID array

JMB362 RAID Driver for JMicron RAID array (driver can be installed from the motherboard CD)

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.