It's free to register, to post a question or to start / join a discussion
Moving Country / Voltage / U.K. to Canada. . .
Likes # 0
Posted June 6, 2011 at 1:24PM
I have recently moved from the U.K. to Canada and my PC will follow shortly.The U.K. mains run on 230 Volts, Canada on 120 Volts. So I have three questions and would appreciate any advice.
I would like to know if my PC will operate in Canada given the differing voltage ?
Is it just a matter of using an adapter ?
I also have a U.K. bought printer, screen and PC speakers and wish to know if they will function in Canada with adapters ?
Thanks in advance.
Likes # 1
Posted June 6, 2011 at 1:48PM
If your PC is a desktop, unless your existing PSU has either automatic detection or is capable of being set to a different voltage your best bet would be to replace the PSU with a local unit of the correct rating for the PC. Most laptops have power supplies that are universal but you need to check the unit specification to be certain.
The printer is likely to require replacing or a voltage converter used between it and the mains supply.
For both the speakers and the screen you will need to check the operating specification of the power supply. Details should either be printed or embossed on the case.
Likes # 1
Posted June 6, 2011 at 2:25PM
If the printer has a power block then read what it says. My two HP's both operate between 110 -240v and 50-60Hz so would work perfectly well in Canada.
Again many PSU operate over the range of voltages, it is very much a case of reading the information on the side of the PSU.
Reply to this topic
This thread has been locked.