Contact Forum Editor

Send an email to our Forum Editor:

PLEASE NOTE: Your name is used only to let the Forum Editor know who sent the message. Both your name and email address will not be used for any other purpose.

Tech Helproom

It's free to register, to post a question or to start / join a discussion

View Forum Rules | Contact Forum Editor

 

Epson printer-Replace 1 cartridge...then more are 'empty'??

buel

Likes # 0

Posted May 21, 2011 at 2:31PM

Hi, I have an epson r220 and i notice than sometimes when i run out of one colour, and then replce it, as soon as i start printing again (or even turn the printer on)it says that one or more other colours are empty! This seems a little odd as they didn't seem to be empty before the original colour needed replacing.

Please does anyone have any thoughts on this?

Like this post
Fruit Bat /\0/\

Likes # 0

Posted May 21, 2011 at 2:42PM

Had same problem with a SX215, found a full reset solved the problem.

Like this post
buel

Likes # 0

Posted May 21, 2011 at 3:34PM

Hi,please can you tell me how to do a full reset?

Like this post
Fruit Bat /\0/\

Likes # 0

Posted May 21, 2011 at 8:22PM

You can reset it using the SSC software here

Like this post
buel

Likes # 0

Posted May 28, 2011 at 9:03AM

Hi, i have downloaded the SSC software but unfortunately under the tab 'Ink Monitor' there is no printer selected, even if i refresh. However, under the tab 'configuration', my printer IS shown

Also, under the tab 'resetter', i clicked on 'test' option and it asks me 'Do you want to begin chip resetting' and 'Remember to remove chip'.....please can i ask what chip i need to remove??

Like this post

Reply to this topic

This thread has been locked.



Check out PC Advisor's other tech forums

Send to a friend

Email this article to a friend or colleague:

PLEASE NOTE: Your name is used only to let the recipient know who sent the story. Both your name and the recipient's name and address will not be used for any other purpose.