It's free to register, to post a question or to start / join a discussion
Acer Desktop Problem - Vista
Likes # 0
Posted May 15, 2011 at 11:47PM
Have an Acer M1641 Desktop PC, When starting, I get the Vista blue bars running across the screen, then it just freezes and that's it - no Ctrl-Alt-Del, nothing. Have tried to perform a clean install of Vista, but it does exactly the same thing when starting from the CD (have tried an alternatice CD.) Have ran diagnostic software on both the HDD (WD Lifeguard) and RAM (MEMTEST), and both pass OK. Have tried another HDD - same thing. Have tried 1 x stick of RAM instead of 2, then the other stick, different slots, etc - all with same result. Have also tried different SATA outputs on mobo, cleared and reset BIOS, etc. ANY help will be greatly appreciated!
Likes # 0
Posted May 16, 2011 at 10:10AM
There are much better hardware experts around on this forum than myself but I wonder if the PSU is playing up.
Likes # 0
Posted May 16, 2011 at 12:40PM
Freezing at scrolling bars is usually a driver problem so you should be able to boot to safemode.
Doing the same when booting from CD-- I suspect its not trying to boot from the CD but is still trying to boot from the hard drive. Is Cd drive set as first boot device in the BIOS?
You need to look at Windows Vista's Repair Your Computer options.
- Startup repair - This automatically fixes problems that are preventing Windows from starting
- System Restore - This will Restore Windows to an earlier point in time
- Windows Complete PC Restore - This will completely restore your entire PC - programs, system settings and files - from a back up that you have previously created (Available in Windows Vista Business, Enterprise and Ultimate editions only)
- Windows Memory Diagnostic Tool - This checks your computer's memory hardware for errors
- Command Prompt - This opens a Command Window
With the Complete PC Restore Option you must have made a backup of your system, either on your hard drive or on a set of DVDs, in order to use this option. If you don't have a backup then don't use this option
How you access the repair options will depend upon whether you have a Windows Vista installation disk or whether your operating system came pre-installed by your PC manufacturer.
Pre-Installed Options NOTE
If no repair options are available your PC manufacturer may have replaced the tools or customised them. Check your Computer Manual before proceeding.
1/ Start your PC
2/ If your PC has one operating system Press and Hold the F8 key as your PC starts. If the Windows Logo appear you will need to start again
3/ If you have a dual boot system a Boot option menu will appear. Highlight the Vista operating system and Press the F8 key
4/ In both cases, if all has gone well, an Advanced options screen will now appear
5/ Highlight the repair Your Computer option and Press Enter
6/ Select a keyboard layout, and then Click the Next button
7/ Next select your user Name and Enter your Password, then Click OK
8/ The recovery options should now appear
Windows Installation Disk NOTE
1/ make sure your PC can boot directly from the Vista DVD. Obviously, most modern PCs can. With older machines you may need to check the PC's BIOS
2/ Start the PC
3/ Immediately insert the Windows Vista DVD into the DVD drive
4/ A Black screen will appear with the words 'Press any key to boot from CD or DVD'
5/ Press Any key to start the booting process
6/ A new screen will now appear with a progress bar. The legend say's 'Windows is loading files'
7/ After a few minutes the Microsoft copyright window ill appear and another small progress bar will be visible
8/ You will next see a Blue curtained screen
9/ After a short while the Language option screen will appear
10/ Select your language and keyboard language and the Click the Next button
11/ At the bottom left of the next screen - the Install screen, Click on the Repair Your Computer option
12/ The System recovery options will now search for your Windows Vista installation
13/ Once the Vista installation has been located, Highlight it and then Click the Next button
14/ You are now presented with the set of recovery options
15/ Click on the Option you require and follow the onscreen prompts
Reply to this topic
This thread has been locked.