VISTA and disk access

  iqs 12:46 PM 30 Aug 09
Locked

Hi,

I have VISTA installed on my media PC,I don't like it but its better then XP when used for media use,in my opinion.

The PC has 2GB of RAM,dual core.The problem is the constant HDD access.The HDD light is constantly flashing

I know that you can disable services,stop scheduled tasks etc.I have disabled some service and deleted all the scheduled task,but the disk access is still happening.

Any ideas please

  BurrWalnut 13:17 PM 30 Aug 09

Check which program/service is accessing/using the CPU, Hard Disk, Network or Memory. Click the Windows Orb (Start) > All Programs > Administrative Tools > Reliability and Performance Monitor and on the right, click on the drop-down arrow.

  iqs 16:26 PM 30 Aug 09

Thanks BurrWalnut will give it ago,cheers

  mooly 18:06 PM 30 Aug 09

Is it patched and fully up to date with SP1 and SP2.
With all Vista's settings at their default this shouldn't be an issue. I also have 2gb ram and the HDD is inactive most of the time even on a web page such as this. Just an occasional blink from it.
The biggest culprit I found (by miles) was security software and currently am running a totally clean Vista install with Microsofts free AV product.

  iqs 20:13 PM 30 Aug 09

Hi mooly and thanks for the reply.I have SP1 installed,from past experiences with service packs I try to avoid them so I have not updated VISTA .

Can I ask what free AV microsoft products use please.

Thanks

  iqs 20:16 PM 30 Aug 09

Have just removed my AV software,and the HDD light is constantly on.

  brundle 20:25 PM 30 Aug 09

Drive indexing is usually the culprit - AV software peforming a complete scan will produce the same results but it's usually easy to check that.

click here

Leave the PC on and unattended for a few hours - set screensaver/power management to allow the machine to stay on for that time, the indexer should finish by that time.

  iqs 20:30 PM 30 Aug 09

Hi brundle,thanks for the reply.I have checked indexing,it states its complete.But will do as you suggest.Cheers

  mooly 07:23 AM 31 Aug 09

First the "free" AV which is only in beta yet, due to be available around October,
click here

I can only relate my experiences. I too suffered with "disc thrashing" for two years with Vista and spent ages reading up on all the tweaks etc that get mentioned, disable this or that, turn off such and such. Nothing made much difference. I thought it was "normal"
It's useful to put the "CPU meter and RAM" useage meter onto Vista's sidebar. Web browsing would cause a lot of HDD activity.
The long and short of it is that Vista alone isn't to blame.
Just out of interest how long does your PC take to boot from cold. I was getting towards 2.5 to 3 minutes, now it's consistently around 1'12" full Aero and sidebar.

On my notebook (3yr old, 2gb ram, AMD Turion 64 mobile processor) following a clean Vista install and getting it fully updated there is "zero" HDD activity. At this point there was no AV product installed. RAM useage around 27% CPU 1% when idling. All Vista's settings at default, nothing tweaked, not even CC installed. Task manager currently shows 50 processes running. At this point I installed the MS beta AV product. After years with paid for paid for packages I was absolutely amazed that this didn't noticeably impact performance. In the last 10 minutes the HDD light has never more than blinked dimly every couple of seconds. Honest !
Have you opened Windows Defender and looked in software explorer to see what start up programs are running. I have anything that isn't Vista related disabled (applications and programs I have installed).
If you open "Performance and reliability" monitor what is your Disk useage shown as ? Below the graphs are drop down menus, the one marked DISK will say to the right in % and kb/mb per second what it's running at. On this web page mine is showing mostly zero with an odd jump to around 12 to 16kb/s.
So what I am getting at is what's achievable... and all this with Vista at default settings. The thing is I haven't done anything to get it like this... this is Vista on it's own.

  iqs 17:15 PM 31 Aug 09

Hi,

I have used defender to switch off non system dependent programs,and have disabled aero .

The following is what displayed under performance and reliability...

CPU 0% to 4% 100% max frequency

Disk 2MB to 15MB 98% highest active time

Memory 0 Hard Faults/sec 25% used

Task manager 33services

Thanks again

  mooly 18:14 PM 31 Aug 09

In performance monitor above if you look at the drop down list under "disk" whatever is using all the resources should be shown at the top of the list.
For it to be at 98% something is canning the HDD.
Was this a clean install of Vista you did, or an upgrade, or preinstalled when you got the PC ?

Advertisement

This thread is now locked and can not be replied to.

Should I upgrade to Windows 10? Windows 10 is now available, so do you have to upgrade? 8 reasons…

Why Vodafone’s frequency choice should interest you: The benefits of 800MHz

Digital visionaries discuss Designing the Future

How to run Windows 10 on Mac: How to run Windows 10 using Boot Camp or VirtualBox to install…