Metric water meter help

  Brumas 20:52 21 Feb 11
Locked

I have to replace my pond liner and will take the opportunity to find out exactly how much the pond holds. In the past I have used the height x length x width (in feet) x 7.48 calculation which gave me the volume in good old gallons, I prefer Imperial measurements.

I have found a ‘water meter’ click here , which I bought, second-hand, ages ago but never used. Of course the instructions aren't to be found so could anyone explain how I would interpret the dials as some of the smaller ones are showing readings and I cannot see any way of re -setting them!

Having said all that I must explain, I am to the measurement of volume using the metric system what Pavarotti was to hang-gliding!!

  Fruit Bat /\0/\ 21:14 21 Feb 11

0.1432 m3 = 31.5 gallons as shown on your meter

  Fruit Bat /\0/\ 21:19 21 Feb 11

1 Gallons (UK) = 0.0045460902819948 Cubic Meters

If you can not reset dials then
take initial reading - fill pond - take final reading -
deduct initial from final reading.

  Brumas 21:57 21 Feb 11

Thanks but I cannot see 0.1432, I’m hopeless!

  Fruit Bat /\0/\ 22:42 21 Feb 11

My eyes are going as well :0) should be 0.1332

Read small dials from right to left
0.1 shows approx 1 1/2
0.01 shows approx 3 1/2
0.001 shows approx 3
0.0001 shows approx 2

  Brumas 23:12 21 Feb 11

Gotcha, thanks.

  natdoor 08:05 22 Feb 11

Or 1 cubic foot = 0.0283168466 cubic metres.

  sunnystaines 11:44 22 Feb 11

too many places use european measurements these days, imperial stuff slowly dying out.

This thread is now locked and can not be replied to.

AMD Ryzen release date, specifications and features: Three CPUs from the Ryzen 7 range now…

1995-2015: How technology has changed the world in 20 years

Glassworks Barcelona shows how it captured the artistic imagination of Conor in A Monster Calls

Best iPhone games 2017 | Best iPad games 2017: 162 fantastic iOS games that you need to play right…