Iron

  Shopgirl 23:39 PM 11 Apr 12
Locked

Hello Can I have views on the following: 1: How can I clean the surface of my Iron. When I have finished Ironing my garments my iron needs cleaning. I know not to use a brillow pad on it as it scrathes the surface. Any suggestions would be helpful.

  Earthsea 23:44 PM 11 Apr 12

Our iron is our go-to tool to turn wrinkled and rumpled clothing into pressed and perfect outfits. But figuring out how to clean an iron, that can be the hard part. These simple steps can help turn that scaly stained iron into a useful tool.

Difficulty: Easy Time Required: 15-20 minutes

Here's How:

Read the user manual. Reading your user manual with give you a good idea of how to care for your iron. After reading it, you'll know if your iron requires distilled water, or descales itself. Take a moment and read the manual.

Clean inside of the iron. To clean the inside of a steam iron, you'll need to know if your iron automatically descales water using a replaceable filter. Make sure to replace your filter on the recommended schedule. Other irons may need to be descaled manually. Pouring a mix of one part water and one part vinegar into the water chamber of the iron and steaming it out will work wonders. Repeat a second time with plain water.

Clean non-coated sole plates. For non-coated irons, you can use baking soda or even a metal polish cleaner to clean the sole plate. For sole plates that need a little extra help, extra fine steel wool can be used as a last resort.

Clean non-stick sole plates. For non-stick coated irons, clean with a soft cloth, warm water, and mild detergent. Always wait until your iron is completely cool and unplugged. Never use an abrasive cleaner. Abrasives will wear away the coating on your iron.

Tips:

If plastic has been melted on your sole plate, it can be removed. Place a piece of aluminum foil on the ironing board and sprinkle it with salt. Ironing over the salt and foil will help loosen the plastic. Never try to scrape the plastic off with metal tools. It may permanently damage the sole plate. If the vent holes of your iron have become clogged with starch or buildup, cleaning them with cotton swabs dipped in a 1 to 1 ratio of water and vinegar can help clean the holes. What You Need

Vinegar Mild dish soap (non-stick sole plates) Clean cloth Baking soda (non-coated sole plates) Metal polish (non-coated sole plates) Water Fine Steel Wool (non-coated sole plates) Aluminum foil (for plastic removal) Salt (for plastic removal) Suggested Reading Clean a Washing Machine Laundry Products and Tools Shortcuts for 10 Household Chores Suggested Reading Soft Drink Stain Removal 15 Minute Bedroom Cleanup Syrup Stain Removal Stain Removal for Syrup

  canarieslover 08:40 AM 12 Apr 12

Good advice above, or you could just do what my wife does, buy a new one. They never seem to last much more than a year in our house.

  Bingalau 19:44 PM 12 Apr 12

I sometimes have a job removing the charcoal from inside ours. But while it still works I make her use it.

  wiz-king 19:56 PM 12 Apr 12

Bingalau I believe you can get ones you put on them new-fangled gas stoves - does away with the messy charcoal. Would give her indoors more time to clean your bicycle.

  Bingalau 20:12 PM 12 Apr 12

It's a tandem and she does all the pedalling too..

Advertisement

This thread is now locked and can not be replied to.

Sony Xperia Z5 review: Hands-on with the phone which the Z3+ should have been

1995-2015: How technology has changed the world in 20 years

How to choose a photographer

iPhone 6S preview: What to expect from Apple's next iPhone