Bleeding rads

  rickf 17:02 23 Sep 14
Locked
Answered

When bleeding radiators which one should you start with if there is an order. I have always bled radomly but I might have not been doing the right thing.

  bumpkin 17:18 23 Sep 14

Start from the lowest and work upwards. Make sure the pump is not running i.e. system off.

  Pine Man 17:18 23 Sep 14

Always start with the radiator furthest away from the boiler.

  bumpkin 17:24 23 Sep 14

It does not really matter a great deal unless re-filling after a drain down.

  BT 17:27 23 Sep 14
Answer

Fit the automatic bleed valves and you'll never have to do it again.

  bumpkin 20:43 23 Sep 14

If your system needs frequent bleeding you need to investigate the underlying cause before more serious problems occur. A properly maintained system, even an old one should not require venting on a regular basis. If you are finding that you need to do it often then autovalves will vent it but that is treating the symptoms not the cause.

  spuds 11:52 24 Sep 14

Keep plenty of mopping up equipment handy, just in case of errors or spillages.

This thread is now locked and can not be replied to.

Qualcomm Snapdragon 835 benchmarks: Antutu, Geekbench 4, GFXBench and PCMark results

1995-2015: How technology has changed the world in 20 years

This animated short film tells a moving story of domestic violence for Refuge

New iPad 2017 preview: Apple's affordable but underspecced new iPad may appeal to the education…