Samsung Galaxy S8 review
Can any of you good folks tell me what the Microsoft people are saying in this message that this link refers to. click here;en-us;817197&Product=winxp
I suspect that this might be the way to get my system fixed but I just dont understand what they want me to do. Cheers - Paul
but the link is splitting itself into two parts.
here is the address.
Can't help you Paul, you still need to sort your link out.
I've tried copy/paste and the last attempt was by typing it out myself. The ; seems to be causing a problem and I'm not sure what to do to correct it.
The text below is part of the Knowledge Base from MS. Sorry for the length of this.
You receive the following stop error message on a blue screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer
*** STOP: 0x00000050 (0xffffffe0, 0x0x00000001, 0xf30da010, 0x00000000)
When you view the system log in Event Viewer, you may notice an event ID 1003 entry with information that is similar to:
Error Time: time
Event ID: 1003
Description: Error code 00000050, parameter1 0xffffffe0, parameter2 0x00000001, parameter3 0xf30da010, parameter4 0x00000000. For more information, see Help and Support Center at click here. Data: 0000: 53 79 73 74 65 6d 20 45 System E 0008: 72 72 6f 72 20 20 45 72 rror Er 0010: 72 6f 72 20 63 6f 64 65 ror code 0018: 20 30 30 30 30 30 30 35 00000MN 0020: 30 20 20 50 61 72 61 6d 0 Param 0028: 65 74 65 72 73 20 66 66 eters ff 0030: 66 66 66 66 64 31 2c
The symptoms of a stop error vary according to the failure options of your computer system. For additional information about how to configure system failure options, click the following article number to view the article in the Microsoft Knowledge Base:
307973 HOW TO: Configure System Failure and Recovery Options in Windows
The four parameters that are included in the error signature information (BCP x), and inside the parentheses of the technical information for the Stop error may vary according to the computer's configuration.
Not all Stop 0x00000050 errors are caused by the problem that is described in the "Cause" section of this article.
This problem occurs because the driver for the USB Universal Reader from Lexar Media, Inc is not compatible with Windows XP.
To resolve this problem, obtain and install the latest driver from Lexar Media, Inc.
Lexar Media, Inc. has confirmed that this problem occurs when you use a version of their Sausb.sys driver with Windows XP that is earlier than version 4.6.
For information about how to contact Lexar Media, Inc, click the appropriate article number in the following list to view the article in the Microsoft Knowledge Base:
65416 Hardware and Software Third-Party Vendor Contact List, A-K
60781 Hardware and Software Third-Party Vendor Contact List, L-P
60782 Hardware and Software Third-Party Vendor Contact List, Q-Z
The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products. Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information
Managed to make it work :-) Looks like you have a usb universal reader made by Lexar Media, inc and you need to go to their website and download the latest driver. It also appears you need to make sure the file Sausb.sys is version 4.6 or later. Hope this helps. Your link is this:- click here;en-us;817197&Product=winxp
Hmmm, it still breaks up the link.
Read click here
Strange link. Thanks for looking.
What was throwing me off the scent was the 3 links to various companies. I'll search for the sites and files and see where that takes me.
This thread is now locked and can not be replied to.