“Since February I have had a D-Link DKT-710 wireless router, but have not been able to set it up”
What problems you having to set up the D-link ASDL routers as they are very simple to install and set up
Reset the router to the original factory default settings by using a ballpoint or paperclip to gently push down the reset button in the following sequence:
Press and hold the reset button while the device is powered off.
Turn on the power.
Wait for 5~7 seconds and then release the reset button.
This will wipe out any settings that you stored in flash memory including user account information and LAN IP settings.
The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet
mask is 255.255.255.0,
The default management Username is “admin” default Password is “admin.”
Do not change the default management Username and Password - Next
Please select your Country United Kingdom, and ISP
VPI – 0 and VCI – 38, information will display Automatically
Click on the Next button to go to the next Set-up Wizard window.
User Name & Password that you presently use to access your ISP service
Connection Type = PPPoA
Connection Method: VCMUX
User Idle Timeout: 4320
MTU - 1492
Save the setting and reboot the router you should now have internet access via the wired Lan card
Once you have Internet access you can than set up the wireless network