wireless connection

  mikeymikeyuk 22:50 17 Nov 05

I have just purchased a new laptop from Dell, its a Inspirion 6000 with wireless internet. I am not great on computers, i have always had a second hand one or used a friends etc. How do i use the wireless internet connection? It says that it has one and picks up signals from the neighbourhood where is live but none of the signals are strong enough anyway. My friend who lives in my house with me has BT broadband and he said that i can connect to that on wireless, but how do i/we do this? Do we have to purchase a special piece of equipment or does he just need to do something to his pc to get it to send the signal? Also does his pc have to be switched on? Thanks, mike.

  mgmcc 00:15 18 Nov 05

To use your wireless enabled laptop for internet access, you need to be able to connect either to another PC which is online and which has a wireless network adapter installed or to a wireless broadband router. This is my standard "blurb" on wireless networking:

To create a wireless network for Internet access and File/Printer sharing, you have essentially two options:

1) Install a Wireless Network Adapter in each PC and create an “Ad Hoc” Wireless Network. This is a network in which the two PCs talk directly with one another, rather than via a Wireless Access Point. “Internet Connection Sharing” is then enabled on the actual Internet connection in the “host” PC and the “client” PC will have Internet access provided the “host” is running and online.

When you enable “Internet Connection Sharing” on the Internet connection, it automatically configures the Local Area Connection with the IP address and subnet mask However, as you will be using a WiFi adapter, you want this address to be allocated to it, rather than a “wired” Ethernet adapter if you have one fitted, so the Local Area Connection should be disabled before setting up “Internet Connection Sharing”. The "Client" PC's Local Area Connection should be set to get its IP address automatically, which it does by DHCP from the "Host" PC. Also, if you run the Zone Alarm firewall in your “Host” PC, the Internet Zone Security level must be reduced from High to Medium or “ICS” traffic will be blocked.

To enable “Internet Connection Sharing” in Windows XP, open the Network Connections folder, right click the actual internet connection (modem connection), select Properties and then the Advanced tab. Tick the box “Allow other network users...etc”

2) The preferred option for connecting more than one computer is to use a broadband Router and, with ADSL, this should be a combined “Router/ADSL Modem”. This is an ”Infrastructure” wireless network because the connected PCs communicate via the router’s Wireless Access Point. Again, a wireless adapter is installed in any PC that needs to connect wirelessly, but often the main PC is close enough to the router for it to use a “wired” connection with only the remote PC connecting wirelessly

With a router, it is the router which connects directly to the ISP and not one of the connected PCs. The router in turn allocates the IP addresses to the PCs, using one of the address ranges reserved for Local Area Networks, usually 192.168.xxx.xxx

Either of these options will additionally allow you to run File and/or Printer Sharing wirelessly across the network.

If you are running software firewalls, the IP addresses of the networked PCs must be put into its "trusted" area to allow them to communicate with one another.

  Taff™ 06:43 18 Nov 05

And here`s my link to set up option 1 above - ad hoc networking without a router click here

This thread is now locked and can not be replied to.

Nintendo Switch (Nintendo NX) release date, price, specs and preview trailer: Codename NX console…

1995-2015: How technology has changed the world in 20 years

8 things designers (and brands) need to know about the modern woman

How to speed up a slow Mac: 19 great tips to make an iMac, MacBook or Mac mini run faster | Speed…