If so this will be applicable.....When you press the hardware Suspend button on an IBM Aptiva computer with a Mwave driver, you may receive the this error message on a blue screen when you resume the computer:
To avoid this problem, use the Suspend command on the Start menu to suspend the computer instead of using the hardware Suspend button.
Failing the above...' It is most likely caused by a hardware conflict with either a DMA or IRQ setting on one of the hardware devices such as a Network Card, Internal Modem, Video Card, Sound card or other device connected to the motherboard.
Check in device manager for devices that share IRQ values. As a troubleshooting tool you can temporarily remove some cards that are not essential to the operation of the computer and see if the problem goes away.@