Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…
I want to build a new pc but i.e. new motherboard, cpu, HDD etc. On my current PC I have XP pro which has been activated. When I build my new PC will I still be able to use the XP Pro that I activated on my old PC?
Depends, is the existing installation OEM (supplied with the computer) If so, no you can't.
If its a full retail version you can, providing you uninstall it from your existing PC first.
Any problems ring Microsoft and tell them you wish to transfer the licence. It will not work on two pc's
If you want to have XP on both machines then you must go out and buy another copy.
I have XP Pro Student upgrade(Retail) from XP Home(OEM) & how do you uninstall XP from your system?
By formatting the hard drive, but you cannot use this XP setup on another machine. The original disc is OEM and is tied to the machine it came with.
You can format and reinstall the OEM version of Home on the old machine. But you will need another qualifying CD to install the retail Pro upgrade on the new PC. You don't have an old copy of Win98 lying around do you? If not you can search the web, it is still available from various sources, but must be retail, not OEM, and should be cheap.
Ok, would i be able to use my existing HDD with XP already on it and attach it to a new motherboard and CPU? I currently have a P4 motherboard and want to upgrade and use AMD 64 Athlon.
You can try, but there is a good chance it will fail. OEM versions of XP are sometimes tied to the bios, this will change with a new m/b. Also you will probably have the wrong m/b drivers installed on the hard drive. Probably asking for trouble.
Also OEM licences are specifically tied to the motherboard (not the whole machine) changing this severs the licence.
I know it's expensive to buy another copy of XP, but that's how it is I'm afraid. The cheapest and surest way is to get hold of a copy of Win98 and use this to verify your upgrade CD.
That's not my experience. Bought OEM copy of XP and loaded it on to my existing machines on formatted HDD. XP loaded and activated via online activation. A few days later I had to replace the m/b and had to reformat the HDD. XP loaded again but I had to ring Microsoft activation and explain the prob. They reactivated the software for a new motherboard with no problem at all.
I installed a new mobo,cpu & memory under the old hard drive with XP, using the old graphics card,modem & even the old hauppage TV card.It was WinXP HOme OEM.
At first boot WinXP reports significant change to the system since it was last used !!
It detects new hardware but each time cancel,cancel,cancel the installation until you reach the desktop. At this point insert your new mobo CD for installation of the drivers.
At some point you will have to allow WinXp to restart whereupon it goes into re-activation mode & you cannot load WinXP until re-activated
NO problem.... you will be faced with a series of six figure codes as your ID which you read out to the Microsoft automated system on 0870 6010100 and in return the automated system gives you a series of six figure numbers back to put into your computer and bingo you're re-activated
I have just built a new PC & have just phoned MS who told me I can use my old H/D with XP on it on the new PC. They asked me to run through my XP product code before they said it was OK
I have changed motherboards, HDD, CD, DVD drives, Graphics Cards numerous times and completed several reformats and each time I have activated on-line with no problems.
This thread is now locked and can not be replied to.