very slow to boot

  no way 19:24 22 Oct 07
Locked

i have just fitted a new mainboard,ram,cpu and graphics card in my lads pc.
a fresh instal of xp then loaded drivers ect but the boot time is really silly for the hardware fitted
(msi k9n6gm mboard, amd 4000+ x2 cpu, 1gb ddr 533 ram
and( i know ots old style) a 6800 xt pcie graphics) with this i thought it would run faster but its boot time is silly ,when running its fine what can i do to speed it up (fast boot is enabled)

  TheTron 19:50 22 Oct 07

What configuration you have? Any cards installed? What HD you have.
Try to unplug all “not must” hardware (cards optical drives USB connected devices etc..), and reset Bios to default settings.
At what stage it stuck? How long it takes to boot? The installation takes long? Had any problems, crashes, blue screens etc…you had this problem with XP default drivers? Any problems at the event viewer?

  no way 20:06 22 Oct 07

xfx pcie graphics card, firewire card,msi dvdrw,maxtor 80gb ide hdd,usb mouse+keyboard
it takes 75secs to reach first xp screen with blue bars then a further 40 secs to desktop this has been its best time up to date ( am i asking to much) theres been no crashes or bsod,,it just seems to be a long time on the "detection" screen cpu memory hdd ect

  Fruit Bat /\0/\ 20:40 22 Oct 07

1 Disable boot virus detection

The boot virus detection setting is a holdover from the early days of computer viruses, when the greatest threat was from virus programs that wrote themselves into the boot sector of hard disks or the partition table. Some motherboards are equipped to monitor any attempt to write to these areas during boot up, and halt the process with a warning for the user.

Since every version of Windows after 3.1 needs to write to these areas during install, and the modern virus style of choice is the email worm, this feature is now obsolete. Disable it for convenience and increased boot speed. It will commonly be found in the 'advanced BIOS features' section of the BIOS.

2.Change boot sequence.

An easy and effective way of speeding up your loading time is to change the boot sequence in the BIOS. By altering this sequence so that your system hard drive is the first device the computer attempts to boot from, you save the precious seconds needed for the computer to check other devices for bootable media. If you wish to boot the system from a CD or floppy, you will need to change the order in the BIOS again, however.

Some BIOS versions include a menu that can be accessed from the POST which allows the user to choose the device he or she wishes to boot from. To do this, go to the 'advanced BIOS features' section of the BIOS and change the 'first boot device' setting to 'hard disk 0.'

3.Disable the XP loading screen

To speed up your boot process slightly, disable the Windows XP loading screen. This can be accomplished easily by opening the MSCONFIG utility ('start\run and type msconfig'), selecting the 'boot.ini' tab and checking the /NOGUIBOOT option.

When you boot your system, you will see a black screen in between POST and the welcome screen from now on.

  Fruit Bat /\0/\ 20:43 22 Oct 07

4. Turn off BIOS disk detection

Most modern motherboards will attempt to detect any IDE devices, such as hard drives and CD drives, during the POST sequence each time the computer boots. By configuring the BIOS with the correct drive information, you can shave a few seconds off your boot time by avoiding this detection process.

To do this enter your system's BIOS setup screen.

Depending on your motherboard, you may have an IDE drive auto-detection menu. If you do, simply select it to automatically set your drives. If not, configure the drives through the 'standard CMOS settings' menu.

Note that some motherboard chipsets (like Nvidia's Nforce 2) do not allow this auto-detection to be disabled.

5.Disable unneeded devices in device manager

A quick fix that can make XP boot faster is to disable any unused devices in the Windows XP device manager. For example if you have a integrated sound card or video card that you have upgraded, or if you do not use a floppy drive on your system, it pays to disable these devices in device manager.

The same goes for extra network cards. Of course, the standard rule of thumb applies here: If you do not know what it is, leave it alone.

To disable unneeded devices in device manager:

Right click on 'my computer' and select 'properties.' From the 'hardware' tab, select 'device manager.' Expand the various categories to locate unused devices. Right click the devices and select 'disable.'

6. Disable auto detection for empty IDE slots

Another quick trick for a faster boot up is to disable the auto detection that Windows XP uses to determine if there are IDE devices present in any of the IDE slots on the motherboard. More specifically, disable this feature on any empty slots to prevent the operating system wasting time and resources checking them.

Right click on 'my computer' and select 'properties.' Go to the 'hardware' tab and select 'device manager' to open the device management window.

Expand 'IDE ATA/ATAPI controllers' and highlight the 'primary IDE channel.' Right click the highlighted entry and select 'properties.' Go to the 'advanced settings' tab.

If either IDE slot on the controller is empty, the 'device type' dropdown box will be not grayed out. Set it to 'none' to disable auto detection of IDE devices on that particular slot.

Repeat the above steps for the 'secondary IDE controller.'

Note that if you wish to add a new IDE device, you will have to reset the 'device type' setting to 'autodetect' in order for Windows to use the new drive.

7. Reduce wait time after XP boots

A common performance problem with Windows XP is 'start lag,' in which the operating system boots up normally, the desktop is visible and usable, but programs will not start, and selecting icons and using the start menu are extremely slow. This can take anywhere from a few seconds to a couple of minutes to clear up, and can make using the operating system extremely frustrating, especially if you are in a hurry after the reboot.

This delay is generally caused by Windows XP's networking services looking for other computers and advertising their functions over the computer's network connections.

If this problem is driving you nuts, there is a way to reduce or eliminate the delay, though if you are attached to a home network, it will reduce your computer's functionality on that network.

If your computer is not attached to a home network:

Right click on 'my computer' and select 'manage.'
Expand 'services and applications' and select 'services' to open the services window.
Highlight the 'workstation' service, right click and select 'properties.'
Set the 'startup type' dropdown box to 'disabled.' Click 'ok.'
Note that you will need to re-enable the workstation service should you wish to network your PC in the future.

If your computer is part of a home network:

Go to 'start\control panel\network and internet connections\network connections.'

Right click your current network connection (should be 'local area connection' unless you have more than one network adaptor) and select 'properties.'
Uncheck the 'File and Print Sharing' box and press 'ok.'
Note that this will disable your computer's ability to share files and printers over the network, though it should not affect your ability to access such resources on another system.

  no way 14:12 25 Oct 07

tried some of these going a bit better thanks for advice...keep up the good work..ta

This thread is now locked and can not be replied to.

Nintendo Switch review: Hands-on with the intuitive modular console and its disappointing games…

1995-2015: How technology has changed the world in 20 years

Method Studios' title sequence for BBC series Taboo is truly unsettling

Best Pages for iOS tips | How to use Pages for iPad & iPhone: 6 simple tips to get more out of…