USB2 not?

  jagsman 16:36 02 Aug 05

I have recently updated my mobo to an ABIT NF7-S version 2.0. After rebuilding and installing everything i ran SiSoft Sandra 2005 to see if everything was up to speed. I noticed that only 1 of the 3 USB controllers was showing as USB2.On the mobo itself there are 2 USB headers on the board as well as 1 on the back panel. The USB sockets on the back panel are the only ones showing as USB2. From the 2 headers on the board i have taken 1 to USB sockets on the front panel of my case, and the other on to a USB expansion card at the rear of the case. I know that the case front USB sockets are probably not USB2 but the expansion card is definately USB2. Does anyone know how to fix this? I have installed all the latest BIOS for the Mobo, and my PC spec is as below;

XP Pro SP2
2500XP Athlon
Seagate 120gb HDD

Thanx in advance for any help

  Eric10 17:09 02 Aug 05

It is perfectly normal to only have one entry for 'USB2 Enhanced Host Controller'. Belarc Advisor, Everest Home Edition, and Device Manager show the same. Relax, there isn't anything wrong with your system.

This thread is now locked and can not be replied to.

What is ransomware and how do I protect my PC from WannaCry?

Disney layout supervisor Rob Dressel on the challenges of visualising Moana

Siri vs Google Assistant