//some 3rd party need geo

usb front conection witch cables

  handy4x 15:26 05 May 03
Locked

i have a m s i kt3 ultra 2 mobo ms6380
and i need to conect the front usb ports on the mobo guide it says
pin1 usbpwr pin2 usbpwr
pin3 usbp2- pin4 usbp3-
pin5 usbp2+ pin6 usbp3+
pin7 gnd pin 8 gnd
pin 9 pin 10 usboc

an my case has 8 cables marked an colored
red 2 ground
yelow 2-d
green 2+d
black 1.d
black 1+d
blue 1 ground
white 2+5v
red 1 +5v
my board is usb2 so i dont know wether this makes any diferance thanks in antisipation handy 4x

  Munkeysbum 15:58 05 May 03

What is the question?

  pj123 16:02 05 May 03

Check out this previous thread

click here

  Munkeysbum 16:15 05 May 03

Well done pj123.
I didn't have a clue.

  handy4x 16:23 05 May 03

no dose not solve the problem as i have mother board manual but nothing came with the case

  pj123 16:36 05 May 03

If your mobo supports front USB connections you should have a block of 9 pins marked USB 2. 1 row of 5 pins and 1 row of 4 pins. Forget pin 5 and count them as pins 1-4 and 5-8.

The cables connect as follows: Red Pins 1 and 5, white or yellow pins 2 and 6, green pins 3 and 7 and black pins 4 and 8

  handy4x 17:32 05 May 03

no dose not work as i have a blue cable and only 1 green and 1 red and blue are marked ground these are the ones i know are corect see above list thanks for trying though

  pj123 14:38 06 May 03

Has your case got front USB ports? if so, how many?

  handy4x 18:07 11 May 03

yes 2 front usb this is what i want to conect

  woodchip 18:11 11 May 03

Red wire to pin 1 followed by white, green ,black. that's on pin's 1,2,3,4.

  DieSse 18:28 11 May 03

Just follow the labels on the pins

+5V = power or pwr

ground is obvious

usb2- = data2-

usb2+ = data2+

The case pins will be marked 1 and 2, but the motherboard 3 and 4 (because 1 and 2 for the motherboard are on the back connectors of the board.)

So your set of four pins for port1 on the case gose to the 4 pins marked 3 on the board.

And the set of four marked for port2 on the case go to the set marked 4 on the board.

So you take a 4 wire set for each port +5v, data+, data-, and Ground and match them up to the pins on the board. The colours of the cables are not relevant - it's what's marked on the connectors that counts.

This thread is now locked and can not be replied to.

What is Google Allo? What is Google Duo? Google Allo UK release date rumours and features: Google…

1995-2015: How technology has changed the world in 20 years

These clever designs help visualise a complex intelligence tool

iOS 10 troubleshooting tips: Simple fixes for the most common iOS 10 problems, from network…