usb devices not recognized / seen

  Fruit Bat 17:37 05 Jan 03
Locked
  Fruit Bat 17:37 05 Jan 03

I am trying to add usb ports to a Via mobo with an intel PII 350mz chip.
Have added both an opti board and usb riser.
Device manager now shows:-
Opti 82C861 PCI to USB Open host controller (working ok)
and Via VT83c572/82c586 pci to USB universal host controller (working ok)
and USB Root Hub x2
but nothing happens when I plug in any kind of USB device (HP845 printer/ card reader /hp scanner)
Already installed 4in1 drivers and filter patch
Opti board works fine when plug into AMD1.2 K7 mobo
Please Help!!!

  AndySD 17:51 05 Jan 03

What operating system and are you running the driver disk first then plugging the usb cable into the pc when it says searching for device?

  woodchip 18:03 05 Jan 03

Have you enabled USB in CMOS

  Fruit Bat 18:06 05 Jan 03

Andy have used both XP home but have now reverted to 98 se2, only have 128k mem.
in past days have seen unknown device, but will not let me update driver (not for this device)
but now nothig is reconized at all when plugged in.
Usb and usb keyboard enabled in bios
Opti on irq 12 shared, via on irq 11 not shared no conflicts on either
Thanks for the reply

  AndySD 18:10 05 Jan 03

Go with woodchip boot into the BIOS/CMOS normally Delete when booting and check USB is Enabled.

  AndySD 18:12 05 Jan 03

Ooops must put my reading head on.

  AndySD 18:20 05 Jan 03

Ok then try Removing the Via VT83c572/82c586 pci to USB universal host controller and rebooting. Then try the attaching a usb device again

  woodchip 18:27 05 Jan 03

The USB on the Board, may have blown the built in fuse which cannot be replaced. But a USB PCI card will work round that Prob

  woodchip 18:29 05 Jan 03

PS go to device manager and remove all USB you can find and reboot your comp

  Fruit Bat 17:05 06 Jan 03

Have removed opticard and via from devicemanager and rebooted, win98 found new hardware via and opti and reinstalled drivers found new hardware and reinstalled on;ly one usb root hub for opticard but still will not see anything plugged into it.

Card reader drivers installed prior to reboot.
card reader not found on reboots if left in or put in after boot.

Hair now getting very thin any more suggestions?

Thanks for the help so far

This thread is now locked and can not be replied to.

How to get Windows 10 for free | How to install Windows 10: There is still a way to avoid paying…

1995-2015: How technology has changed the world in 20 years

Alex Chinneck’s giant ice cube Christmas tree at Kings Cross

Apple rumours & predictions 2017: The iPhone 8, new iPads, and everything else you should expect fr7…