TPlink Extender

  woodchip 16:51 03 Aug 13
Locked
Answered

Is it normal for Download speeds to drop from round about 12000kbps when I connect through Router to about 4000kbps when through the Extender? though the connection in the corner by the clock says Excellent connection

  woodchip 19:56 03 Aug 13

Anybody

  Secret-Squirrel 10:20 04 Aug 13

"TPlink Extender"

Is yours a powerline adapter with wireless that creates a new wireless network, or is it one that simply boosts the signal of an existing wireless network? If you're not sure then post the TP-Link's model number.

  woodchip 14:08 04 Aug 13

Its like another modem, it boosts the signal

  Secret-Squirrel 16:22 04 Aug 13

There will be some reduction in network speed because the repeater has to receive and re-transmit packets of data. A 66% reduction in bandwidth seems far too much however.

When you're repeating or extending an existing wireless network then the general consensus appears to be that the extender needs to use the same wireless-channel number as the router so log into both units and check what they're set to. Or you can use a WiFi site-survey program like inSSIDer.

  Housten 16:40 04 Aug 13

Good Afternoon, woodchip,

I know nothing about how these work. But we recently had fibre broadband installed - incorrectly, but I have another thread on that - and I had to purchase one of their 'AV220+ with pass through' kits, and all I can say is that there didn't seem to be any slow down at all. Because we had many engineers attending to our problems the last one corrected our setup so I do not need it now, so I can not do a test for you. Sorry, but I hope you can get your problem and speed sorted out. Persistence will work, keep on, and on,and on,and on at your ISP. It should work.

Best of luck.

  woodchip 21:15 04 Aug 13

Just found this, "WDS may also be considered a repeater mode because it appears to bridge and accept wireless clients at the same time (unlike traditional bridging). However, with this method, throughput is halved for all clients connected wirelessly". and think it is my problem, I have not setup WDS in my router would it be better to do so?

but as its not setup it should not halve should it?

Channels are both the same, the Extender Settings are setup using a CD

  woodchip 21:17 04 Aug 13

PS both Router and Extender on Ch 7

  woodchip 21:33 04 Aug 13

Just tried it with WDS enabled and it crippled my Wireless speed 0n my HP laptop. disabled it and it gone back to over 12000kbps, with it switched on it dropped to just under 40000.

So I have no idea why it drops when using the extender, as the above speed is direct wireless to my 3Com router

  Secret-Squirrel 08:54 05 Aug 13

Perhaps there's some wireless interference occurring in the vicinity of your extender/repeater - it could be caused by a neighbour's wireless router. Try changing your wireless-channel numbers. Because you're currently on channel 7, 1 and 11 are the other two you can use.

  woodchip 13:03 05 Aug 13
Answer

Changed to Ch5 but no different will tick the box as I don't think its going to change

This thread is now locked and can not be replied to.

Huawei P10 review

1995-2015: How technology has changed the world in 20 years

How Nearly Normal created super-fun papercraft for Google

47 iPhone camera tips to help you take better photos