Insert a blank disc and a tape
In stop mode, press [SETUP]. Select “General Setting” using [U / D], then press [ENTER].
Select “Recording” using [U / D], then press [ENTER].
Select “Dubbing Mode” using [U / D], then press [ENTER]. Option window will appear.
Select “VCR DVD” using [U / D], then press [ENTER].
Press [SETUP] to exit.
Press [PLAY P], and then press [PAUSE p] at the point you wish to start recording.
Press [DVD]. Make sure to select a recording mode using [REC MODE].
Press [DUBBING]. VCR to DVD duplication will start.
10 Press [STOP S] to stop the recording.
Note for VCR to DVD duplication: • After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to play back the tape until the picture is stabilised, then set the starting point which you wish to start recording, and start VCR to DVD duplication. • This unit will automatically stop the duplication if playback with no image detected for more than 3 minutes during VCR to DVD duplication. • If the playback sound mode of VCR is set to “STEREO”, “LEFT” or “RIGHT”, the sound mode upon dubbing is automatically switched to “STEREO”. If the playback sound mode is set to “MONO”, the sound mode upon dubbing is also “MONO”. • If you set “External Input Audio” to “Stereo”, the sound is recorded in “Stereo” (Video mode, VR mode and +VR mode). • While in Video mode or +VR mode, if you set “External Input Audio” to “Bilingual”, the audio set in “Bilingual Recording Audio” mode is recorded. While in VR mode, if you set “External Input Audio” to “Bilingual”, bilingual audio is recorded. • The main and sub audio will be simultaneously recorded (VR mode). You can select audio modes during playback. • If you want to watch the duplicated material, after the VCR to DVD duplication, press [DVD] first then press [PLAY P